Heating and cooling systems rarely fail politely, and in Pembroke Pines, FL, a breakdown usually arrives on the hottest afternoon or the coldest night of the year. The tricky part is how many different failures produce the same symptom. A system that runs but never reaches temperature might be fighting a weak run capacitor, a pitted contactor, a low refrigerant charge, a dirty flame sensor, or nothing more exotic than a filter so clogged the blower is starving for air. A system that will not start at all could be a tripped float switch on a backed-up condensate drain, a failed transformer, a bad thermostat, or a control board that has stopped sequencing the equipment.
Our two most requested repairs are AC Repair and Furnace Repair. If something has stopped working, start there.
Warning Signs for HVAC Repair
Recognizing the warning signs early can save you time and money. Keep an eye out for the following clues:
- Airflow at the registers that feels weak in every room
- Warm air from the vents in cooling mode, or cool air in heating mode
- The outdoor unit humming but refusing to actually start
- Rising utility costs even though the house feels worse
- Repeated breaker trips every time the heating or cooling kicks on
- Water around the indoor unit from a clogged condensate drain
- Frequent on-off cycling while the house never gets to the thermostat setting
- New noises such as grinding, squealing, buzzing, or banging
Don't Wait for a Total Failure
A failing capacitor, clogged condensate drain, or dirty flame sensor rarely fixes itself and usually gets more expensive to address the longer it runs. If you notice any of these signs, call (754) 242-8765 for a prompt inspection.
